Automate AM2 Owner's Manual page 18

To lock/arm using your remote
➤
To arm the system press
will begin to flash. The Failsafe® Starter Kill will prevent the vehicle's starter
from cranking if it has been installed. The vehicle's horn (if connected) will
honk and the parking lights will flash once to confirm Locking/Arming of the
system.
To unlock/disarm using your remote
➤
To disarm the system press
®
Failsafe
will honk twice and the parking lights will flash twice to confirm
unlocking/disarming of the system. If progressive unlocking is installed, the
first press of the unlock button will unlock only the driver's door and a
second press will unlock the remaining doors.
To enter or exit Valet
➤
Turn the ignition to the ON position. Turn the ignition back off. Press and
release the Valet
if you have entered Valet
The LED will turn off when exiting Valet
To activate Panic Mode
➤
Press and hold
To activate Aux Channel 2
➤
Press and hold
To activate Aux Channel 3
➤
Press and release the
To exit Panic Mode
➤
Press
Location of Valet Switch___________________________________
© 2007 directed electronics, inc.
Q Q U U I I C C K K R R E E F F E E R R E E N N C C E E G G U U I I D D E E
for one second. The doors will lock. The LED
Starter Kill will be deactivated and the vehicle's horn (if connected)
®
Mode
®
switch within 10 seconds. The status LED will light steadily
®
Mode. To exit Valet
for 2 seconds.
for 1.5 seconds.
and
on the transmitter.
for one second. The doors will unlock The
®
Mode, repeat the steps above.
®
Mode.
together.
17