Vesa-Ddc-Compatible Vga Interface; Preset Operating Modes - Fujitsu Siemens Computers MCM 17P2 Operating Manual

Color monitor MCM 17P2

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
If the monitor MCM 17P2 is not yet displayed in the list of monitors, you can select one of
i
the following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf
MCM 17P1, MCM 1707, MCM 1706, MCM 1705, MCM 1704, MCM 1702

Preset operating modes

The display position and size have been set to optimum values at the factory for the
i
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see
Horizontal frequency
31.5 kHz
31.5 kHz
50.6 kHz
53.7 kHz
63.9 kHz
68.7 kHz
80.8 kHz
91.2 kHz
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
1024 x 768 pixels.
18 - English
"Operation of the monitor").
Refresh rate
100.0 Hz
100.0 Hz
100.0 Hz
59.9 Hz
70.1 Hz
85.1 Hz
85.0 Hz
85.0 Hz
Screen resolution
640 x 480
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
A26361-K581-Z100-2-5E19