Switching The Monitor Off; Notes On Power Management - Fujitsu Siemens Computers C551 Operating Manual

Fujitsu siemens computers operating manual monitor c551
Table of Contents

Advertisement

Color monitor C551

Switching the monitor off

Ê
Press the ON/OFF switch (3).
The power indicator (2) is dark.

Notes on power management

If your PC has a VESA DPMS (Video Electronics Standard Association, Display Power
Management Signaling) power management function (energy-saving mode), your monitor will fully
support this function. The monitor has a four-stage power management system.
Stage
Power indicator
Function
indicators
Function
Power
consumption
If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the
power consumption.
If there is still no input, power consumption is further reduced (OFF mode). Once an input is made at
the PC the screen contents are redrawn and full power is restored.
The length of the individual stages is determined by the power management system of the PC. For
detailed information on how energy-saving mode operates refer to the Operating Manual or
Technical Manual of your PC.
The service life of your monitor will be extended if the OFF mode is switched to after 30
i
minutes at the earliest (setting in screen saver or in your PC's BIOS setup).
When the monitor is switched to OFF mode by the power management system a power
consumption of up to 5 W is maintained to feed the circuit for redrawing the screen
contents.
To cut off power consumption totally, press the ON/OFF switch on the front of the monitor.
10 - English
ON
glows green
are dark (except
in setting mode)
Monitor operating
normally
Normal
< 65 W
Standby mode
glows amber
glow
consecutively
(running light)
Monitor
is dark
Reduced
to < 10 W
Suspend mode
glows amber
glow
consecutively
(running light)
Monitor
is dark
Reduced
to < 10 W
A26361-K610-Z100-3-5E19
OFF mode
glows amber
are dark
Monitor
is dark
Reduced
to < 5 W

Advertisement

Table of Contents
loading

Table of Contents