Advertisement
Available languages
Available languages
1o All wiring must comply with local and national
electrical codes and must be installed by a
qualified electrician.
Ifyou have any questions
regarding the fo)(owIng instructions, contact a
qualified electric(an.
2. Check available power supply and resolve any
w(ring problems BEFORE installing and
operating this unit°
3. Th(s 1t5V air condilioner uses 12.0 or less
nameplate amps and may be use d in any
properly wired, general purpose household
receptacle.
See Table 1 for specifications for
individual branch circuit.
4. For your safety and protection, this unit ts
grounded through the power cord plug when
plugged into into a matching wall eutteL If
you are not sure whether your wall outlet Is
properly g roun.ded, please cons u!t a
qu_i fled electrlc.lan,
:,.
"
"
T,g:
ii
ouiiei
i3-p ii
mate,
the p,ug (3-
pin)on theservice cordsupplied withtheunit.
DO NOT use plugadapters, See Table2 for
receptacle and fuse information. If tt Is necessary
to use an extension cord to connect your air
conditioner, use an approved "air conditioner"
extension cord only (available at most local
hardware stores)
6. The ratingplate on the unit contains electrical
and other technical data, The raling plate
is located on the right stde of the unit, above the
power cord.
Table
1 : Suggested Individual Branch Circuit
NameplateAmps
AWG Wi_eSize"
5,0 to 12
14
AWG- American Wi_e_age
* Based en copperwire at 60 _Ctemperaturerating.
Table 2: Receptacle and Fuse Types
RatedVolts
125
Amps
15
Wail Oultet
Fuse Size
t5
Time Delay Fuse
PlugType
(or clrcutl breaker)
Advertisement
