Accessing The Onboard Memory - AAXA Technologies M1 Limited User Manual

Hide thumbs Also See for M1 Limited:

Table of Contents

General Operation

To connect an A/V cable insert the 3.5mm portion into the A/V port of the projec-

tor. Then click on either the "A/V input" icon in the main menu, or press "source" on

the remote control and select "A/V input". A blue screen will appear and the

Projector will be ready to accept an A/V signal.

Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune

(optional), Playstation Portable (optional), and others. Please check

www.aaxatech.com or your AAXA dealer for optional A/V cables.

Accessing the onboard memory

The M1 projector includes 1GB of onboard memory for storage.

To access this memory connect a USB cable to the back of the

projector and a computer. Then select the "USB Data" function

in the main menu.

The computer should auto-detect the connected projector and its onboard

memory as a " ash drive. " Double-click the drive to open the drive contents and

manipulate as a standard USB ash drive.

NOTE: If the computer fails to detect the ash drive, check to make sure the projec-

tor is in USB-Data mode and do a search for new devices. If still unable to nd the

drive, please consult with your operating system's owner manual regarding

detecting ash drives.

Table of Contents