Manufacturer's Notes - Fujitsu Siemens Computers 19T2 Operating Manual

You may set only those resolutions and refresh rates specified in the
Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or
customer service center.
Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include this manual.
Cleaning note19T2
Always pull out the power plug before you clean the monitor.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid will run into the system.
Ensure that the ventilation areas of the monitor are free.
When cleaning the surface of the screen, always use a soft, slightly damp cloth in order to
avoid scratching the glass.
Wipe the monitor housing with a dry cloth. If the monitor is particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
Transport notes
When transporting the monitor ensure that it is not exposed to strong magnetic fields.
Transport the monitor with care and only in its original packaging or another corresponding
packaging fit to protect it against knocks and jolts.
Above all, never drop the monitor. If the CRT is damaged, there is a risk of implosion!

Manufacturer's notes

Energy Star
The EPA estimates that computer equipment uses 5 percent of all business electricity and it is
growing rapidly. If all desktop PCs and peripherals enter a low-power mode when not in use, the
overall savings in electricity could amount to $ 2 billion annually. These savings could also prevent
the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million
automobiles.
As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product
meets the Energy Star guidelines for energy efficiency.
CE certificate
The shipped version of this device complies with the requirements of the EEC directives
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".
A26361-K616-Z100-2-5E19
The Fujitsu Siemens color monitor 19T2 is designed to conserve electricity
by dropping to less than 15 W when it goes into suspend mode and to about
3 W when it goes into OFF mode. With this new power management the
19T2 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy
Star Computers award.
Color monitor 19T2
"Technical data" chapter.
English - 3