Notes On Ergonomic Color Adjustment - Fujitsu Siemens Computers 19T2 Operating Manual

Resetting all settings for the current input signal
Ê
Press - with the OSD menu hidden - the factory settings button
All settings for the current input signal are reset.
With this method those settings are not reset which are not influenced by a change in the
i
input signal (language and position of the OSD menu, color setting, locking of the buttons
for monitor adjustment).
Resetting all settings for all input signals
Ê
Press and hold down the factory settings button
least 2 seconds.
All settings including brightness and contrast are reset to the factory values.

Notes on ergonomic color adjustment

If you select colors for the display in your application programs, take note of the information below.
The primary colors blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colors for characters and background and giving the primary colors full
modulation, you can obtain very suitable color combinations (see the following table):
Background
black
white
purple
blue
cyan
green
yellow
red
+ Color combination very suitable
- Color combination not suitable because color locations are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.
A26361-K616-Z100-2-5E19
black white
+
+
+ +
- +
+ -
+ -
+ -
- +
Characters
purple blue
+ -
+ +
-
-
- +
- +
+ +
- -
Color monitor 19T2
.
- with the OSD menu hidden - for at
cyan green
+ +
- -
- -
+ -
-
-
- -
- -
yellow red
+ -
- +
- -
+ -
- -
- -
+
+
English - 15