Fujitsu Siemens Computers 172E Operating Manual page 19

OSD menu MENU button
Pressing once:
11. COLOR
Selects the
TEMP
marked function.
The symbol
begins to flash
(adjustment
mode).
When the colour
mode symbol
flashes, press the
button to reach
the colour
adjustment
No. 12.
Pressing twice:
Ends the
adjustment mode.
12. COLOR Pressing once:
ADJUST Selects the
MODE marked function.
The symbol
begins to flash
(adjustment
mode).
Pressing twice:
Ends the
adjustment mode.
Pressing once:
13. ZOOM
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode).
Pressing twice:
Ends the
adjustment mode.
RECALL Activates the factory settings within all menus. If you want to return to the
factory settings, press the RECALL button.
DEGAUSS Degausses the monitor.
During degaussing a muffled noise is produced, the colours may change and
the picture may wobble. These effects are normal. There is no malfunction.
Caution!
Please wait approximately 20 minutes before executing the function again. Do
not press the button for a longer time in order not to reduce the service life of
the Degauss circuit.
A26361-K823-Z100-1-5E19
Minus button (-) Plus button (+)
Selects the desired colour mode
Selects the desired function
Adjusts the selected function
Selects the desired function
Reduces the Increases the
horizontal and horizontal and
vertical picture vertical picture
size size
Selects the desired function
Colour monitor C779 / 172E
button
Back to No. 1
Back to No. 1
Back to No. 11
Back to No. 11
Back to No. 1
Back to No. 1
English - 11 11