Fujitsu Siemens Computers 172E Operating Manual page 18

Colour monitor C779 / 172E
OSD menu
7. GEOMETRY
8. MOIRE
CONTROL
9. LANGUAGE
10. OSD
POSITION
10 10 - English
MENU button
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode).
Pressing twice:
Ends the
adjustment mode.
The geometry controls enable you to adjust the curves or angles at the corners
of your screen.
PINCUSHION
PARALLELO-
GRAM
TRAPEZOID
PINBALANCE
ROTATION
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode).
Pressing twice:
Ends the
adjustment mode.
Sets the marked
language and
returns to No. 2
Moves the OSD
menu horizontally
or vertically.
Minus button (-)
Adjusts the selected function
Selects the desired function
Increases or reduces the curve of the sides either toward
inward or outward.
Increases or reduces the slope of the sides to the left or
right.
Increases or reduces the lower screen so that it is exactly
as large as the upper screen.
Changes the geometry of the screen to the left or right.
Turns the entire screen clockwise or anti-clockwise.
Adjusts the selected function
Selects the appropriate language
Moves the OSD
menu to the left or
downward
Plus button (+)
Moves the OSD
menu to the right
or upward
A26361-K823-Z100-1-5E19
button
Back to No. 2
Back to No. 2
Back to No. 2
Back to No. 2
Back to No. 2