Control Panel & Features - Maytag W10097007A-SP Use & Care Manual

CONTROL PANEL& FEATURES
/ automatic P%"_°k_1 _ f i' timed
dry _ 70 ,o dry push tostart
h_gMlea coo aown _ 50 Nghheal endo_yri_s_gnal
0.tt::i{
automatic
less dry_@_ CENTENNIAL commerc dn s ener_" _ %o
_I_ecnnoto8_, _
\\ no ,,_a,
Not all features and options are available on all models.
Appearance may vary.
CYCLE KNOB
Use Cycle [{nob to select available cycles on your dryer. Turn
the knob to select a cycle for your laundry load. See "Cycle
Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a se[ectab[e temperature knob, you may
choose a setting based on the fabrics in your load. On some
models, temperature is included in the cycle selections.
Drying time and temperature will depend on your dryer
model.
SENSOR DRY/AUTOMATic DRY
Senses moisture in the load or air temperature and shuts off
when the load reaches the selected dryness level. Gives the
best drying in the shortest time. Drying time will vary based
on fabric type, load size, and temperature setting.
WRINKLE PREVENT Feature (on some models)
The WRINKI_E PREVENT feature will run after your drying
cycle is complete. It periodically starts and stops the dryer,
tumbling the load without heat to help avoid wrinkling.
On some models, WRINKLE PREVENT automatically starts
at the end of the cycle. Opening the door will stop this
feature.
NOTE: A signal will sound periodically when the WRINKI.E
PREVENT setting is selected, but only if the End of Cycle
signal is also selected.
O
TEMPERATURE / FABRIC
Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
O
PUSH TO START/END OF CYCLE SIGNAL
The End of Cycle Signal Produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
Turn the END OF CYC[.E SIGNAl_ knob to select the desired
setting (On or Off). Press the PUSH TO START [<nob to start
the dryer.