Advertisement
Model RC-210 / Model RC-220
Specifications
Operational Features
Display .....................................In the cued position, the display shows Cut name, index number, length
Position Arrows.........................Select drives and directories.
Select Arrows............................Review Cuts by scrolling through directory listing. Displays Cut name
Presets....................................."Hot Keys" for rapid playback of sixteen pre-assigned Cuts.
Find
...................Access Cuts from the current directory, or any other directory, by
(
)
NO DEDICATED KEY
Keypad.....................................Use these 10 keys to enter Cut ID (index) numbers. Simply punch in
Stack Directory..........................Direct access to the stack directory when using the FIND function.
Cancel......................................Cancels incorrect entries.
Enter ........................................Enters/confirms new selections or entries.
Assign Presets ..........................Selected Cuts are "mapped" to the sixteen presets. Hard disk access to
View Playlist .............................Visual preview of a playlist before use. (Precludes playback when in
Make Playlist.............................Assemble groups of Cuts together. (Activates the PAUSE function.)
Play-Stop..................................Controls DigiCart transport functions from RC-210.
Play-Stop-Record ......................Controls DigiCart transport functions from RC-220.
Loop* .......................................Plays a Cut or a Stack continuously.
Pause*......................................Places machine on "hold" in both play and record modes. Also used to
Edit Menu* ................................Selects Edit Menu options.
Setup Menu* .............................Selects Setup Menu options.
Utility Menu* .............................Selects Utility Menu Options.
*
RC-220 FEATURES ONLY
Notes:
The terms Stack and Playlist are synonymous.
DigiCart, DigiCart/II, and DigiCart/II Plus are used interchangeably.
Original DigiCarts (DigiCart/I) require Version 2 Firmware in order to use Models RC-210 and RC-220.
Mechanical & Electrical Specifications
Dimensions .................... 1.875" x 11.5" x 7" (47.6mm x 292mm x 178mm) (H-W-D)
Weight ........................... 5 lbs. (2.3 kg)
Display........................... 2-line x 20 character CCF backlit, super-twist LCD display. Viewing angle
Power Supply .................. External UL/CSA/VDE approved 9-volt/1amp modular supply. Feeds
Cable............................. 25 foot (7.5 meters) highly flexible 9 conductor cable.
Part No. RCA-59: Interconnect Cable Assembly for connecting RC-220 To 1-4 DigiCart/IIs.
RC-205/210/220
Remote Control Owner's Manual
of Cut, assigned directory and drive source. It also shows the Cuts
sampling rate and recording mode— linear or Dolby AC-2 encoded. In
the play mode, it shows remaining or elapsed time, current Cut and the
next Cut cued up.
and time.
directly entering the assigned ID number.
the number and hit the ENTER key. (This provides visual verification on
the display of the proper Cut.) Hit PLAY when ready for playback.
Cuts only; presets cannot be assigned from Bernoulli disk.
this mode.)
preview PRESET assignments.
adjustment on rear panel.
RC-210/220 through 9-conductor cable via connector at DigiCart/II end.
Alternate power connection for local power source located on rear panel of
Remote Control units; standard power coaxial jack w/ 2.1mm dia. center pin,
5.5mm O.D., center pin positive voltage.
Connects directly to DigiCart/II or RCA-59 Interconnect Cable Assembly.
Second Edition
March 1997
Page
31
Advertisement
