Download Print this page

360 Systems RC-205 Owner's Manual page 28

Advertisement

5.
PLAYING PRESETS
1.
2.
STACK OPERATIONS
CREATING AND PLAYING A QUICKSTACK
Quickstacks are not stored in the DigiCart; they are for one-time only use.
1.
2.
3.
RC-205/210/220
Remote Control Owner's Manual
Press CANCEL to assign PRESETS again, or to exit the
ASSIGN PRESETS function.
Note: After assigning a preset, if you wait about 10
seconds before doing anything, the bottom
line of the remote display changes to
"Cancelling" for about 3 seconds. The Assign
Presets button remains lit, but no further
assignments can be made until Assign
Presets is pressed agin.
Press any white PRESET key to play back an assigned
PRESET.
Note:
The SETUP MENU'S RESTART MODE — IMMEDIATE or
ON COMPLETION — affects the playing of PRESETS.
To preview a PRESET, press the PAUSE button, then the
PRESET button of choice. The display will read its name. If
the selection is correct, push the PAUSE button again and
the cut will play immediately.
Press MAKE PLAYLIST. The Pause LED on the DigiCart
and on the RC-220 will illuminate.
Use the SELECT and POSITION Arrows or FIND operations
to choose a Cut or Stack.
Press ENTER to add the first Item to the QuickStack.
Second Edition
March 1997
Page
26

Advertisement

loading

Related Products for 360 Systems RC-205

This manual is also suitable for:

Rc-210Rc-220