Ok/Ng/Kp Flag (Udf Only); Ok Mark (Fat Hd Mode Only); Copying Clips; Deleting Clips - Sony PMW-50 Operating Instructions Manual

OK/NG/KP Flag (UDF Only)

When adding a flag, you can select from OK
FLAG ADD, NG FLAG ADD, and KEEP FLAG
ADD in the Clip Operation menu (page 32) on the
thumbnail screen. When deleting a flag, select
CLIP FLAG DELETE.
Note
Flagged clips are not protected. To protect clips from
deletion, select LOCK CLIP in the Clip Operation menu
(page 32) on the thumbnail screen. To remove the
protection, select UNLOCK CLIP.

OK Mark (FAT HD Mode Only)

Select "OK MARK ADD" from the Clip
Operation menu to add the OK mark, or select
"OK MARK DELETE" from the Clip Operation
menu to delete it.

Copying Clips

You can copy clips on an SxS memory card to
another SxS memory card.
Each clip is copied with the same name to the
destination SxS memory card.
Notes
• If there is another clip having the same name on the
destination SxS memory card, the clip is copied under
a name adding a single-digit number in parentheses to
the end of the original clip name.
The parenthetical number is the minimum value that
does not exist in the destination memory card.
Examples:
ABCD0002(1) if ABCD0002 exists
ABCD0002(2) if ABCD0002(1) exists
ABCD0005(4) if ABCD0005(3) exists
• When using FAT, you cannot copy a file 10 times or
more if clips with the same clip name followed by
parenthetical numbers (1) to (9) already exist on the
card.
• When using UDF, you cannot copy a file 1000 times or
more if clips with the same clip name followed by
parenthetical numbers (1) to (999) already exist on the
card.
• A warning message is displayed if there is not
sufficient space on the destination SxS memory card.
Replace the SxS memory card with one with sufficient
space.
• When copying an SxS memory card on which multiple
clips have been recorded, copying all clips to the end
may not be achieved, even if the destination card has
the same capacity as the source card, depending on
usage conditions, memory characteristics, etc.
34 Clip Operations
Copying a specified clip
Select a clip on a thumbnail screen, then select
"COPY CLIP" from the Clip Operation menu.
Copying clips collectively
Select "Clips" in "Copy All" (page 51) in the
OTHERS menu to copy clips on an SxS memory
card collectively to another SxS memory card.
If the memory card contains clips of both HD and
SD Mode, only the clips of the currently selected
mode are copied. This is convenient when you
wish to extract clips of the same mode only.

Deleting Clips

Select "DELETE CLIP" from the Clip Operation
menu.
Note
Clips with an OK mark and flagged clips set to LOCK
CLIP cannot be deleted.
To delete them, release the OK mark or the LOCK CLIP
setting before performing the delete operation.
Deleting clips collectively
Select "All Clips DEL" in "Clip" (page 50) in the
OTHERS menu.
Notes
• If the memory card contains clips of both HD and SD
Mode, only the clips of the currently selected mode are
deleted.
• Clips with an OK mark and flagged clips set to LOCK
CLIP cannot be deleted.

EXPAND CLIP Screen

In UDF and FAT HD Mode, the EXPAND CLIP
screen permits you to divide a clip into 12 blocks
of equal duration and show a thumbnail image of
the first frame of each block on the screen.
In FAT SD Mode, the EXPAND CLIP screen
shows the thumbnail images of the first frames of
the segment files only for a clip segmented
because its file size exceeded 2 GB.
This helps you to quickly cue up to a desired
scene in a clip of long duration.
You can display the EXPAND CLIP screen by
selecting the clip on the thumbnail screen.
1
Select a clip on the thumbnail screen,
then press the SEL/SET button.