Sony XC-HR50 Technical Manual page 23

Ccd black-and-white video camera module
Hide thumbs Also See for XC-HR50:
Table of Contents

Advertisement

Setting the shutter speed using DIP switches
N HD/VD input
• Continuous VD input
1
2 µ s to 250 ms
1
Trigger*
Exposure time (Te)*
External HD*
1
External VD*
1
(Continuous
VD)
T: T=under 10 ms*
Video out
WEN
*1 This is an external input signal. Make sure to input
both HD and VD signals.
*2 The exposure time (Te) is determined by the
setting of DIP switches.
For details, see page 17.
*3 Normal operation is resumed when the trigger
pulse width is 1/3 s or more. The trigger falling
edge restores external trigger shutter operation. At
this time, the 50 ms after the falling edge of the
trigger pulse is an external trigger input inhibition
area. There is no guarantee of operation for any
trigger input in this period.
External trigger shutter operation
2
2
Exposure time (Te)*
4
T: T=10 ms or more*
1
2
525 H (Bining OFF)
263 H (Bining ON)
Normal
operation*
3
3
Trigger pulse width*
2
4
*4 An image is output when an external VD signal
falls 10 ms or more after a trigger pulse rises (2
and 3 in the figure). If the period from the trigger
rising edge to the external VD falling edge (T in
the figure) is under 10 ms, it is not defined whether
the image is output for the external VD falling
edge or the image is output for the next external
VD falling edge. (1 in the figure shows that the
image is output for the next external VD). In this
case, see WEN since the image and WEN make up
a pair.
Note
An image is not output correctly when the next trigger
is input before the image for the previous trigger has
been output.
Mode Settings
Mode transition state
External input
External trigger
inhibition area
shutter operation
(50 ms)
3
Exposure time
(Te)*
2
T: T=10 ms or
4
more*
3
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents