Using The Web Menu - Sony PMWF3L/RGB Supplement Manual

Item
WEP Key Index
(key index)
Input Select
(key input format)
9
Select "Key" and set it to the network
key (or security key) set on the
computer and press the jog dial.
10
Select "Execute" under "Set" and press
the jog dial.
The message "Wi-Fi Setting Executing..."
appears and the camcorder starts connection.
If the connection to the computer is
complete, the message changes to "Wi-Fi
Setting OK."
Black squares appear in the "Wi-Fi Status"
column to show the connection status. (The
number of squares shows the level of
connection status.) In the "Wireless Mode"
column, the IEEE802.11 standard of the
established connection appears (802.11b,
802.11g or 802.11n).
Tip
It is also possible to make a connection by
accessing a network connection started on the
camcorder from the computer.
To terminate the Wi-Fi connection
Terminate the Wi-Fi connection on the computer.
To revert to the default settings (reset)
If you have trouble making a connection or you
want to start over, you can reset your Wi-Fi
connection settings to the default settings.
Select "Net Config Reset" under "Network" of
the OTHERS menu and press the jog dial.
If the reset is executed, the message "Net Config
Reset Done" appears.
The camcorder attempts to connect to the network
using a MAC address as the SSID.
12 Using a Wi-Fi Adapter
Setting
1 when "Encryption" is set to
"WEP"
Depending on the network
key (or security key),
"ASCII5," "ASCII13,"
"HEX10," or "HEX26" when
"Encryption" is set to "WEP"
or
"ASCII8-63" or "HEX64"
when "Encryption" is set to
"TKIP" or "AES."
To make a connection in infrastructure
mode
Setting up the wireless LAN access point
The following settings are required.
• Network ID (SSID)
• Encryption method (Encryption)
• Network key (Key)
For details on setting up the wireless LAN access
point, refer to the manual supplied with the wireless
LAN access point.
To find and connect to a wireless LAN from the
camcorder
Perform the same procedure in "To make a
connection in ad hoc mode" (page 11), excluding
the following.
• Do not perform steps 1 and 2.
• Set "Network Type" to "Infra" in step 5.
• The "Wi-Fi" settings made in step 8 change as
follows:
Item Setting
SSID Selected network name
(network name)
Network Type "Infra"
(connection mode)
Ch (channel) Automatically set
Authentication Depending on the settings for the
(network access point, "Open," "Shared,"
authentication) "WPA," or "WPA2"
Encryption Depending on the settings for the
(data encryption) access point, "Disable," "WEP,"
"TKIP," or "AES"
WEP Key Index 1 when "Encryption" is set to
(key index) "WEP"
Input Select Depending on the network key (or
(key input format) security key), "ASCII5,"
"ASCII13," "HEX10," or
"HEX26" when "Encryption" is
set to "WEP" or
"ASCII8-63" or "HEX64" when
"Encryption" is set to "TKIP" or
"AES."

Using the Web Menu

You can operate the Web menu built into the
camcorder from a computer when it is connected
to the camcorder via a Wi-Fi connection.
Using the Web menu, you can check the
information and settings for the camcorder and
upload the planning metadata file.