Operating From The Rm-B150/B750; Adjusting The Camcorder From The Rm-B150/B750 - Sony PMW-350K Supplement Manual

• "Memory Stick" and
trademarks of Sony Corporation.
• "Memory Stick PRO-HG Duo" and
are trademarks of Sony
Corporation.
are Operating from the
RM-B150/B750
When the RM-B150 or RM-B750 Remote
Control Unit is connected, some camcorder
functions can be controlled from the RM-B150/
B750.
You can use the RM-B750's display or a video
monitor connected to the MONITOR connector
of the RM-B150/B750 to control the camcorder
by menu operations and monitor the camcorder
picture.
To connect
Using the remote cable (10 m (33 ft)) supplied
with the RM-B150/B750, connect between the
REMOTE connector (8-pin) of the camcorder and
the camera connector of the RM-B150/B750.
When you turn on the camcorder after the
connection, the camcorder enters Remote Control
mode.
Adjusting the Camcorder from the
RM-B150/B750
You can control menu and recording operations
from the RM-B150/B750.
For the functions that can be controlled from the
RM-B150/B750, see "Functions That Can Be
Controlled from the RM-B150/B750" on page 11.
Notes
• Remote Control operations cannot be made if USB
connection to the camcorder is enabled.
• Do not connect or disconnect the RM-B150/B750
when the camcorder is on.
The following controls of the camcorder becomes
inoperative when the RM-B150/B750 is
connected.
• GAIN selector
• WHITE BAL switch
• AUTO W/B BAL switch
• SHUTTER selector
• OUTPUT/DCC switch
• Buttons and switches to which the Turbo Gain
function has been assigned, including the
ASSIGN. 1/3 switches, the ASSIGNABLE 4

Operating from the RM-B150/B750

7