Operating From The Rm-B150/B750; Adjusting The Camcorder From The Rm-B150/B750 - Sony PMW500/HD02 Supplement Manual

• When the backup is done, format the SDHC
card with the device to be used.
For details on the formatting method, refer to the
Operating Instructions of the device to be used.
• "Memory Stick" and
trademarks of Sony Corporation.
• "Memory Stick PRO-HG Duo" and
Corporation.
are
are trademarks of Sony
Operating from the
RM-B150/B750
When the RM-B150 or RM-B750 Remote
Control Unit is connected, some camcorder
functions can be controlled from the RM-B150/
B750.
You can use the RM-B750's display or a video
monitor connected to the MONITOR connector
of the RM-B150/B750 to control the camcorder
by menu operations and monitor the camcorder
picture.
To connect
Using the remote cable (10 m (33 ft)) supplied
with the RM-B150/B750, connect between the
REMOTE connector (8-pin) of the camcorder and
the camera connector of the RM-B150/B750.
When you turn on the camcorder after the
connection, the camcorder enters Remote Control
mode.
Adjusting the Camcorder from the
RM-B150/B750
You can control menu and recording operations
from the RM-B150/B750.
For the functions that can be controlled from the
RM-B150/B750, see "Functions That Can Be
Controlled from the RM-B150/B750" on page 11.
Notes
• Remote Control operations cannot be made if USB
connection to the camcorder is enabled.
• Do not connect or disconnect the RM-B150/B750
when the camcorder is on.
The following controls of the camcorder becomes
inoperative when the RM-B150/B750 is
connected.
• GAIN selector
• WHITE BAL switch
• AUTO W/B BAL switch
• SHUTTER selector
• OUTPUT/DCC switch
• Buttons and switches to which the Turbo Gain
function has been assigned, including the
ASSIGN. 1/3 switches, the ASSIGNABLE 4

Operating from the RM-B150/B750

7