Restoring The Phu-60K/120K/120R - Sony PMW-350K Supplement Manual

To format a PHU-60K/120K/120R from a
menu
You can format a PHU-60K/120K/120R by using
OPERATION >Format Media in the setup menu.
This command is available when the PHU-60K/
120K/120R is already formatted, unformatted,
and formatted in an unsupported format.
1
Select OPERATION >Format Media in
the setup menu.
2
Select [Media(A)] (slot A) or [Media(B)]
(slot B).
3
Turn the MENU knob to select
"Execute", and press the knob.
The format confirmation message appears on
the viewfinder screen.
4
Turn the MENU knob to select
[Execute], and then press the knob.
For information about menu operations, refer
to the Operating Instructions of the camcorder.
Formatting begins.
During restoration, an in-progress message
and status bar (%) are displayed, and the
ACCESS lamp lights in orange.
When formatting is completed, a completion
message is displayed for three seconds.
Restoring the PHU-60K/120K/
120R
If an error occurs with data on the PHU-60K/
120K/120R for some reason, the hard disk must
be restored.
If a PHU-60K/120K/120R that needs to be
restored is connected, a message that prompts you
to execute restoration is displayed on the
viewfinder screen.
To restore the hard disk
Turn the MENU knob to select [Execute], and
then press the knob.
The restoration begins automatically.
During restoration, an in-progress message and
status bar (%) are displayed, and the ACCESS
lamp lights in orange.
When restoration is completed, a completion
message is displayed for three seconds.
If restoration fails
• A PHU-60K/120K/120R on which an error
occurred may become usable again through
repeated formatting.
• In some cases, some clips cannot be restored.
Playback of clips that can be restored becomes
possible again.
Using a PHU-60K/120K/120R 5