Fujitsu Mobile Color Scanner User Manual page 37

3
Move the scanner as follows.
• When Auto is checked under Direction on the driver screen
The scanner automatically recognizes orientation of scanned characters and converts
them into right orientation. You can scan the original without considering the scanning
direction.
If either of the following settings is made, the scanner cannot detect the scanning
direction:
– Resolution: 150 dpi or less
– Image Type: Halftone
Guide
The scanner may not be able to convert scanned characters depending on the character
size, design, or contained image data. In this case, check Manual under Direction and
scan the original again.
• When Manual is checked under Direction on the driver screen
Scan the original as follows:
When R->L/U->D is set
If you move the scanner in the direction opposite to the direction indicated by the above
arrow, the scanning result is flipped vertically or horizontally.
Guide
When scanning, move the scanner using something square as the guide for fine scanning.
When L->R is set
25