Names And Functions Of Parts On The Top Of The Scanner; Names And Functions Of Parts On The Bottom Of The Scanner; Mounting The Core For Electromagnetic Interference - Fujitsu Mobile Color Scanner User Manual

Names and Functions of Parts on the Top of the Scanner

Ready lamp
When this lamp is on,
scanning is enabled.

Names and Functions of Parts on the Bottom of the Scanner

Scan window
An image is scanned through
this window. Always keep
this window clean.
Main rollers
When the main rollers move,
animage is scanned.

Mounting the core for electromagnetic interference

First mount the core for electromagnetic interference by following the procedure below:
(1) Form a small loop in the cable near the USB
connector as shown in the figure below and fit the
loop into the groove in the core.
2
Scan button
Pressing this button starts scanning. Pressing
this button once again stops scanning.
Mobile scanner
USB connector
Auxiliary rollers
Cable
(2) Close the core and press it
until it snaps in place.