Language Settings - Yamaha PianoCraft DRX-730 Owner's Manual

Chapter 10: Initial Settings
3
Press Play/Pause (
"HDMI CLEAR."
If you change your mind at this point, select
"DVD — NO REQ. " instead.
4
Press STANDBY/ON.
The HDMI Resolution is reset to its default
setting and the DRX-730 goes on standby. Press
STANDBY/ON again to turn it back on. The
HDMI Audio setting (page 13) is set to off.
HDMI Color
Sets the HDMI color output.
• Full range RGB: Provides very bright whites and
deep blacks.
• RGB: Select this if white and black areas of the
picture are too pronounced with the Full range
RGB option.
• Component: This is the standard component
video format used by HDMI components.
The default setting changes depending on the
connected HDMI component.

Language settings

For the Other Languages options of the Audio
Language, Subtitle Language, and DVD Menu Lang.
settings, you can also specify the language by using
the 2-letter abbreviations or 4-digit codes listed on
page 62.
1
Select "Other Languages," and then press
ENTER.
2
Use Left/Right ( / ) to select a language by
abbreviation.
For some languages, only the code number is
displayed.
• To specify a language by using the 4-digit codes,
use Up/Down ( / ) or the number buttons to
enter the appropriate code, and then press
ENTER.
Audio Language
Sets the default soundtrack language to be used with
DVD-Video discs.
• English (default): English soundtrack will be
used if available.
• Languages: Selected language will be used if
available. (Available languages depends on where
you purchased the DRX-730.)
54
En
/ ) repeatedly to select
• Other Languages: Use the language abbreviations
and codes listed on page 62 to specify languages
not listed above.
Notes:
• With some DVD-Video discs, the soundtrack
language will be set by the disc regardless of this
setting.
• With some DVD-Video discs, you can select the
soundtrack language from a menu. In this case,
press MENU to display the menu, and then select
the soundtrack language.
Subtitle Language
Sets the default subtitle language to be used with
DVD-Video discs.
• English (default): English subtitles will be used if
available.
• Languages: Subtitles in the selected language will
be used if available. (Available languages depends
on where you purchased the DRX-730.)
• Other Languages: Use the language abbreviations
and codes listed on page 62 to specify languages
not listed above.
Notes:
• With some DVD-Video discs, the subtitle
language will be set by the disc regardless of this
setting.
• With some DVD-Video discs, you can select the
subtitle language from a menu. In this case, press
MENU to display the menu, and then select the
subtitle language.
• The Subtitle Language setting also applies to
®
DivX discs that use external subtitle files (see
"About DivX®" on page 58).
DVD Menu Lang.
Sets the default language to be used for menus on
DVD-Video discs and some DivX
• w/Subtitle Lang. (default): Menus in the same
language as that specified for the Subtitle
Language setting will be used if available.
• Languages: Menus in the selected language will
be used if available. (Available languages depends
on where you purchased the DRX-730.)
• Other Languages: Use the language abbreviations
and codes listed on page 62 to specify languages
not listed above.
®
discs.