Fujitsu fi-4640S Operator's Manual page 73

Image scanner

Hide thumbs Also See for fi-4640S:

Table of Contents

3. Setting IPC pre-set mode

When you set the use of the IPC pre-set mode, you must set it as follows:

1 Press "Next"

or "Previous"

scanner display Screen 43.

2 At Screen 43, press

pre-Setting and press

pre-setting. Then the scanner displays

Screen 43-1.

NOTICES

The following IPC pre-settings can be selected when IPC-4D is installed:

Preset 1: Captures texts printed on the colored background

Preset 2: Produces an image with good contrast

Preset 3: OCR Smoothing

Preset 4: Image Smoothing

Preset 5: Dither

Preset 9: Suitable for pre-printed paper (color)

Preset 10: Suitable for carbon paper

The following built-in IPC pre-settings can be selected even though IPC-4D is not installed:

• Sharpen

• Darken Character

• Copy Quality

3 At Screen 43-1, select "Yes" or "No". Note

that when you select "Yes", the IPC setting

from the Host computer is ignored. If you

select "No", the IPC setting will be changed

according to the host setting. Finally press

NOTICE

When you select the Copy Quality, select the scanner and printer settings carefully to get the best quality.

7-6

and let the

to select the

to activate the

Table of Contents