4
Set the guides so that there is a small
clearance between the document edges
and the guides. Load the document face
down on the ADF paper chute and adjust
the guides to the document width.
NOTICES
• Squeeze the guide lever to free the guides.
• Do not load document stacks thicker than 8
mm.
• Set the guides so that they touch the
document sides.
5
After the read command is issued from
the host system and the documents are
read, scanned documents are expelled
into the stacker for removal.
Documents
Guide
Guide lever
(Both sides)
max. 8 mm
(0.32")
3-7