Fujitsu fi-4220C Operator's Manual page 54

I I I I Connecting the SCSI Interface Cable
When using the scanner with SCSI interface, a third-party SCSI
interface cable and SCSI card must be present.
•
SCSI interface cable
The physical specifications of connector is complied with
SCSI-2.The 50 Pin Contact Shielded High-Density SCSI
Device Connector is used.
•
SCSI card
The recommended SCSI card is noted on the following home
page.
http://imagescanner.fujitsu.com/
•
When connecting the SCSI interface cable,
be sure to first connect the SCSI interface
cable then turn on the power of the scanner
and the personal computer.
•
Connect the scanner so that it is the terminal
device on the SCSI daisy chain.
•
The SCSI card and SCSI interface cable has
to be purchased separately.
2.2 Connecting the Scanner to a PC
2
25