Leg Installation; Leveling/Adjustments/Alignment - Viking RVGR330 Installation Manual

Leg Installation

1
Legs are packed in the cardboard top pack.
Note: Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
3
Screw legs into couplings on all
four corners.
14
2
1
1
3
2 2
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew temporary legs
from couplings .
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.

Leveling/Adjustments/Alignment

1
Measure the four corners in cutout area to verify if
flooring is level.
3
Move unit into opening.
side and front to back. Side trim of the high corner
5
If leveling is required, move unit out of opening.
15
2
For uneven or sloped floors, level unit with
metal shims only, as the adjustment required may
exceed the thread available in the leg.
4
" " "
3 / 8 3 / 8 3 / 8
) ) )
c m c m c m
9 5 9 5 9 5
( 0 . ( 0 . ( 0 .
Check that unit is level side to
must be 3/8" (0.95 cm) above countertop.
6
1
1
Lift unit and prop on wood blocks.