Fujitsu KD96009-0648 User Manual page 28

Switch No.
Memory SW7-1 Baud Rate
SW7-2 Data Length
SW7-3
SW7-4
SW7-5 Flow Control
SW7-6 DMA Control
SW7-7 VCom Protocol
Memory SW8-1 Print Width
SW8-2 Paper Type
Memory SW9-1 Code Page
Memory SW9-2 International
Character Set
Memory SW9-3*
SW9-4* JIS/Shift JIS
Memory SW10-1 Print Density
SW10-2 Print Speed
SW10-3 ACK Timing
* In this printer, Memory Switches 9-3 and 9-4 are not usable.
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of
three actions: pressing the FEED button, pressing and holding the FEED button,
and opening or closing the printer cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED
button pressed and held, turn the printer power on, and then press the
FEED button twice. Close the cover. If the current settings of the memory
switch etc. are printed, the printer is now in the memory switch setting
mode.
Memory SW (1) 00000000
Setting Default
9600 bps
8bits
Stop Bit 1bit
Parity NONE
XON/XOFF
Valid
PC Setting
576 dots
1 Color Normal 1 Color Normal, 1 Color BM, 1 Color Label,
PC437
USA
Kanji OFF
JIS
130%
Level 9
Before Busy
1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps, 115200 bps
7bits, 8bits
1bit, 2bits
NONE, EVEN, ODD
DTR/DSR, XON/XOFF
Valid, Invalid
PC Setting, DTR/DSR, XON/XOFF
360 dots, 384 dots, 420 dots, 432 dots, 436 dots,
512 dots, 576 dots, 640 dots
2 Color Normal, 2 Color BM
PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/PC864/
Thai Code 18
USA, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea
ON, OFF
JIS, Shift JIS
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
Before Busy, Same Period, After Busy
0: OFF state
1: ON state
(No indication for 0/1 with memory switch 7-10)
— 25 —
Set Values