Troubleshooting - Belkin F8Z136-BLK User Manual

For ipod nano
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Troubleshooting

Issue - My iPod nano does not seem to be charging.
Solution 1 - Make sure that the TuneBase FM is correctly connected to your car's power
outlet. The green indicator light on the cigarette-lighter adapter portion of the product
should be lit at all times.
Solution 2 - Check to see that the iPod nano is pushed all the way into the cradle.
Solution 3 - Ensure that your car's power outlet is receiving power. Some cars are
designed so that power is not provided to the power outlet unless the car is in ignition
mode or the engine is running. If none of these solutions solves the problem, the fuse of
the TuneBase FM might be burned out. In order to replace the fuse, please carefully follow
this procedure:
NOTE: DO NOT ATTEMPT TO DO
THIS IN THE CAR. Use a clean, level
surface or table for disassembly so
that components do not get lost.
The contact piece at the front end
of the cigarette-lighter adapter
is spring-loaded. With pliers,
carefully and slowly remove the
nut at the front end so that the
spring inside the cigarette-lighter
adapter does not get lost. The
fuse will be easily accessible now.
Purchase a new fuse at any auto-
supply store.
Please refer to Fig. A for correct order
of assembly. Be sure to tighten the
nut firmly with pliers.
5357_F8Z136eaBLK_man.indb 11
FIG. A
SPRING
(NOT PICTURED)
FUSE
CONTACT
FRICTION WASHER
METAL WASHER
NUT
EN
Troubleshooting
| 011
16/1/07 9:40:26 am

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tunebase fm

Table of Contents