Belkin TuneBase FM Quick Start Manual

Customizing TuneBase FM for your iPhone or iPod

1. Identify your iPod or iPhone. 2. Select the sleeve that is marked
on the front with the model
name of your iPhone or iPod
on the matching sticker.
3. Slide sleeve into the 4. Choose the correct rubber 5. Snap pad
slot in the top and side pad for your iPhone or iPod. into place.
of TuneBase FM, until For iPod nano, skip to step 6.
it latches in place.
Car Installation
6. Test-fit your 1. Remove iPhone or iPod 2. Insert iPhone or iPod 3. Press the ClearScan button.
iPhone or iPod and insert TuneBase into TuneBase FM. TuneBase FM displays
in the cradle. FM into power outlet. the best frequency.

Manual Frequency Selection (optional)

If ClearScan cannot identify a
frequency, the FM band may
be too crowded. In this case,
you may want to manually
tune to a station:
4. Match the 5. Play music. 6. Find a frequency without a station on 7. Match station
frequency on it. A good frequency will be between using the
the car stereo. other stations, with a lot of static. (+) and (-)
buttons.
8. Play music.