Table of Contents
Related Manuals for Belkin F8Z075
Summary of Contents for Belkin F8Z075
- Page 1 User Manual TuneFM for iPod ™ ®...
- Page 2 Introduction Congratulations and thank you for purchasing the innovative TuneFM from Belkin. This product is designed to play your iPod through your car, home, or portable stereo. Please review this User Manual carefully so that you can be sure to get the most from your iPod, virtually anywhere you go.
- Page 3 Car Setup Instructions 1. Turn down your car stereo’s volume. 2. Connect the Belkin TuneFM to your iPod (at the bottom of the iPod). 3. Connect the included Auto Power Cord to your cigarette-lighter outlet in your car and to the bottom of your TuneFM for optional powering and charging in the car.
- Page 4 Using the TuneFM Transmitter The TuneFM transmitter function automatically turns on when the iPod is connected. It automatically turns off when the iPod is removed. 1. Tune your stereo frequency to a channel with a weak broadcast signal. The ideal channel is one that is not broadcasting a radio program, or is doing so weakly.
-
Page 5: Using The Tunefm Transmitter
Using the TuneFM Transmitter 5. Adjust the volume of your FM radio to the desired listening level. NOTE: We recommend that you remove the TuneFM from the iPod when not in use. Frequency display Memory station display Plastic spacer Frequency selector Memory stations 1 –... -
Page 6: Storing And Using Presets
Storing and Using Presets 1. To store a preset, select the desired frequency using ▲ or ▼buttons. Press and hold the desired preset button (1, 2, 3, or 4) for two seconds. An audible beep sounds in the transmitted audio when the new frequency is programmed*. The iPod display reflects the change when the memory button is released by showing which memory button was pressed followed by the frequency saved in that memory position. - Page 7 ��� Stereo/Mono Selection Transmitting music in stereo generally gives you the highest-quality listening experience. However, you may get better FM signal reception by changing the transmission to mono. The TuneFM transmits in stereo mode by default. We suggest that you switch from stereo to mono transmission only if your car stereo is NOT receiving a clear signal from the TuneFM, or if you are listening to mono recordings such ����...
-
Page 8: Troubleshooting
Troubleshooting Issue – The audio is distorted. Solution Tune your car stereo and the TuneFM to a different frequency. Issue – I am unable to get clear FM reception. Solution 1 Tune your car stereo and the TuneFM to a different frequency. Solution 2 In some instances, lowering the car antenna (available in some cars) improves the clarity of the TuneFM’s signal. - Page 9 Troubleshooting Issue – iPod playback stays paused after I’ve changed a setting on the TuneFM. Solution Simply press the “Play/Pause” button on your iPod to resume playback. Issue – The TuneFM does not appear to be saving my settings. Solution Be sure NOT to remove the iPod from the cradle or remove power to the TuneFM while adjusting the TuneFM settings.
- Page 10 Troubleshooting Issue – My iPod does not seem to be charging. Solution 1 Make sure that the TuneFM is correctly connected to your car’s power outlet with the included Auto Power Cord. Solution 2 Ensure that your car’s power outlet is receiving power. Some cars are designed so that power is not provided to the power outlet unless the car is in ignition mode or the engine is started.
- Page 11 CAR FIRST. FAILURE TO OBSERVE THIS SAFETY WARNING CAN RESULT IN POSSIBLE INJURY OR PROPERTY DAMAGE. Belkin does not assume any responsibility for personal injury or property damage incurred due to hazardous driving as a result of interaction with the TuneFM, the iPod, or the power outlet of the car.
-
Page 12: Fcc Statement
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F8Z075/ F8Z075-BLK to which this declaration relates: Has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 13 Belkin Corporation warrants the Belkin product for three years. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, or...
- Page 14 Belkin product and how to proceed with your claim. Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser.
-
Page 15: Warranty
IN NO EVENT SHALL BELKIN CORPORATION BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - Page 16 Australia: 1800 235 546 New Zealand: 0800 235 546 © 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.