Colour; Black-Level Offset; Black-Level; Contrast - Optoma HQView-320 Operating Instructions Manual

3.6.

Colour

This menu contains adjustments associated with setting up inputs to the unit. Use the Up and Down
keys to scroll to the required item and press the Menu key.
3.6.1.

Black-Level Offset

Available Settings: 0 IRE, 7.5 IRE
Used to select 7.5 IRE black level set-up adjustment. Should always be set to 7.5 IRE for HDMI video
inputs.
3.6.2.

Black-Level

Settings: -50 to 50 in steps of 1
Black level controls the offset applied to the video signal.
3.6.3.

Contrast

Settings: -50 to 50 in steps of 1
Contrast controls the gain applied to the video signal.
3.6.4.

Saturation

Settings: -50 to 50 in steps of 1
Control of video saturation, applies to all video inputs but not computer input signals or formats.
3.6.5.

Hue

Settings: -50 to 50 in steps of 1
Control of video hue, applies to all video inputs but not computer input signals or formats.
3.6.6.

RGB values

This is a user-defined colour temperature setting whereby individual R,G,B gain and offset (bias) can be
set so as to accurately calibrate a particular input to the display device.
3.6.7.

Colour Temp

Settings: 5500, 6500, 7500, 9300
Colour Temp allows the user to select from pre-configured colour temperatures to match the colour
temperature of the incoming signal. If both Colour Temp set here in the Colour menu and Native Colour
Temp set in the Output menu are set to the same value, no conversion is performed.
3.6.8. RGB values
This is a user-defined color temperature setting whereby individual R,G,B gain and offset (bias) can be
set so as to accurately calibrate a particular input to the display device.
©
Calibre UK Limited Issue 2.40
nd
22 April 2013
14