Kodak ESP 7 Networking Setup Manual page 6

2
With WPS Connect selected, press OK.
3
Select one of the following two methods of connecting:
IMPORTANT: Before you press OK on the printer, make sure you know where the
router's button is, or where to enter the generated PIN.
Push Button Configuration
NOTE: You will have two minutes to press
or select the WPS button. It may be
a button on the device or a virtual
button in the device's software.
a
With Push Button Configuration
selected, press OK.
b
Press or select the WPS button for your
wireless router.
6
Entering a PIN
a
Press to select Generate WPS
PIN, then press OK.
b
In your wireless router's software,
locate the PIN screen.
c
Enter the PIN you received from the
LCD into the PIN screen.
www.kodak.com/go/aiosupport