Control Panel And Features - Whirlpool WED5500BW Use And Care Manual

Electronic dryer
Hide thumbs Also See for WED5500BW:
Table of Contents

Advertisement

Available languages

Available languages

CONTROL PANEL & FEATURES
POWER BUTTON
1
Press to turn the dryer on and off.
2
DRYER CYCLE Knob
Use your Dryer Cycle Knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
Timed Dry
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
Sensor Cycles/Dryness Level
Senses moisture in the load and air temperature and shuts
off when the load reaches the selected dryness level. Gives
the best drying in the shortest time. Drying time will vary
based on fabric type, load size, and dryness setting.
START/PAUSE BUTTON
3
Press to start a cycle, or press once while a cycle is in
process to pause it.
4
OPTIONS AND SETTINGS
Temp
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
NOTE: The Air Dry Temp Feature is not available on the
Sensor Cycles.
1
2
5
Not all features and options are available on all models.
Appearance may vary.
3
4
Wrinkle Shield™ Feature
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD™ feature periodically tumbles, rearranges, and
fluffs the load to help keep wrinkles from forming.
Get up to 90 minutes of heat-free, periodic tumbling at
the end of a cycle. Press the WRINKLE SHIELD™ button
to turn ON or OFF at any time before the cycle has
ended.
Cycle Signal
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
Press CYCLE SIGNAL button to turn signal on or off.
NOTE: When the Wrinkle Shield™ setting is selected
and the Cycle Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle
Shield™ setting ends.
5
CYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents