Information Codes - Samsung DV456ETHDSU/AA User Manual

troubleshooting
pRObleM
Shuts off before load is dry
Lint on clothes
Garments still wrinkled after
Wrinkle Away
odors remain in clothing
after refresh.

InFoRmATIon CoDES

Information codes may be displayed to help you understand what is occurring with your Dryer better.
eRROR dIsplAy
te Clogged Lint Screen
Vent is restricted
he Invalid heating Temp when the dryer
is running
Running the dryer with door open
de
dF Door is not closing properly
Unit detects a button is being
be2
pressed for over 30secs or button is
stuck
Fe Invalid power source Frequency
Ae Electronic Control Problem
(Communication Error)
2e Electronic Control Problem
(Over Voltage Error)
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
32_ troubleshooting
sOlUTION
• The dryer load is too small. Add more items or a few towels and
restart the cycle.
• The dryer load is too large. Remove some items and restart the dryer.
• Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
• Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of black linen pants).
• Divide larger loads into smaller loads for drying
• Check pockets thoroughly before washing and drying clothes.
• Small loads of 1 to 4 items work best.
• Load fewer garments. Load similar-type garments.
• Fabrics containing strong odors should be washed in a normal cycle.
MeANING sOlUTION
Clean the screen or vent.
If the problem continues, call for service.
Call for service.
Close the door and then restart.
If the problem continues, call for service.
Call for service.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
Call for service.