Table of Contents
Advertisement
change the active status of the certificate press the <+> key. To delete the hash press the <del> key. To add
another key press the <ins> key.
Set FQDN – Sets the fully qualified domain name for the computer.
Set PKI DNS suffix – Sets the PKI DNS suffix.
TLS PSK
The submenu contains the settings for TLS PSK configuration settings. Setting or deleting the PID/PPS causes a partial un-
provision if the setup and configuration is "In-process".
Set PID and PPS – Sets the PID and PPS. Enter the PID and PPS in the dash format. (Ex. PID: 1234-ABCD ; PPS:
1234-ABCD-1234-ABCD-1234-ABCD-1234-ABCD) A PPS value of '0000-0000-0000-0000-0000-0000-0000-0000'
does not change the setup configuration state. If this value is used the setup and configuration state stays as "Not-
started."
Delete PID and PPS – Deletes the current PID and PPS stored in ME. If there is no PID and PPS entered, the MEBX
returns an error message.
TLS PKI – Remote Configuration Settings
The remote configuration options are contained under the TLS PKI sub menu. There are four remote configuration items:
Remote Configuration Enable/Disable
Manage Certificate Hashes
Set FQDN
Set PKI DNS Suffix
Advertisement
Table of Contents
Troubleshooting
