Back to Contents Page
USB Device Procedure
The default console package provided is the Dell!" Client Management (DCM) application. This section provides the procedure
to set up and configure Intel® AMT with the DCM package. As mentioned earlier in the document, several other packages are
available through third-party vendors.
The computer must be configured and seen by the DNS server before you begin this process. Also, a USB storage device is
required and must conform to the requirements listed in
The nature of management software is that it is not always dynamic or real time. In fact, sometimes if you tell a computer to
do something, such as to reboot, you may just have to do it again before it will work.
1. Format a USB device with the FAT16 file system and no volume label and then set it aside.
2. Open the Altiris® Dell Client Manager application by double clicking the desktop icon or through the Start menu.
3. Select AMT Quick Start from the left navigation menu to open the Altiris Console.
Configuration Service--Using a USB
Device.