Intel Precision M2400 Administrator's Manual page 27

The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer
in static mode. The computer requires two MAC addresses (GBE MAC address and Manageability MAC Address) to operate in
static mode. If there is no Manageability MAC address, Intel AMT cannot be set in static mode.
Intel AMT Configurations Example in Static Mode
Intel AMT Configuration Parameters
Intel AMT Configuration
Host Name
TCP/IP
Provision Model
SOL/IDE-R
Remote FW Update
Save and exit MEBx and then boot computer to the Windows operating system.
*
Information on this page provided by Intel.
Back to Contents Page
Values
Select and press <Enter>
Example: IntelAMT
Set the parameters as follows:
Enable Network interface
Disable DHCP Mode
Set an IP address (e.g., 192.168.0.15)
Set a subnet mask (e.g., 255.255.255.0)
The default gateway address is optional
The preferred DNS address is optional
The Alternate DNS address is optional
Set the domain name (e.g., amt.intel.com)
Intel AMT 4.0 Mode
Small Business
Enable SOL
Enable IDE-R
Enabled