Removing The System Board; Installing The System Board - Dell Latitude 10 - ST2e Owner's Manual

Removing the System Board

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
c) speaker
d) front camera
e) docking board
3. Disconnect the LVDS and docking board cables.
4. Remove the screws that secure the system board to the computer.
5. Lift up the system board at a 45° angle and pull it away from the computer.

Installing the System Board

1. Place the system board in its compartment on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the LVDS and docking board cables to the system board.
16
Before Working Inside Your Computer .