Dell Latitude 10 - ST2e Owner's Manual page 25

Option
Admin Setup Lockout
Table 8. Secure Boot
Option
Secure Boot
Expert Key Management
Table 9. Performance
Option
Multi Core Support
Intel SpeedStep
C States Control
Intel TurboBoost
Hyperthread Control
Table 10. Power Management
Option
AC Behavior
Wake on LAN
Description
Allows you to enable or disable the option to enter setup when an admin password is
set.
• Enable Admin Setup Lockout (Default)
Description
Specifies whether the process will have one or all cores enabled. The performance of
some applications will improve with the additional cores.
• All (Default)
• 1
• 2
Allows you to enable or disable the Intel SpeedStep mode of the processor.
• Enable Intel(R) SpeedStep (Default)
Allows you to enable or disable the additional processor sleep states.
• C states (Default)
Allows you to enable or disable Intel TurboBoost mode of the processor.
• Enable Intel TurboBoost (Default) — Allows the Intel TurboBoost driver to
increase the performance of the CPU or graphics processor.
This options allows users to enable and disable the Hyperthread Control.
• Hyperthread Control (selected by default)
Description
Allows the computer to power-uon automatically, when AC adapter is plugged. The
option is disabled.
• Wake on AC
This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
Function
Enables or Disables the secure boot feature. Default :
Disabled
Allows you to manage all secure boot keys.
25