Dell Latitude 10 - ST2e Owner's Manual page 23

Table 3. Boot Sequence
Option
File Browser Add Boot Option
File Browser Del Boot Option
Table 4. Date/Time
Option
System Date
System Time
Table 5. System Configuration
Option
USB Configuration
Miscellaneous Devices
Table 6. Video
Option
LCD Brightness
Table 7. Security
Option
Admin Password
Description
This field lets you set, change, or delete the administrator (admin) password (also
known as the setup password). The admin password enables several security
features.
The drive does not have a password set by default.
To add a new password:
• Enter the old password
• Enter the new password
• Confirm the new password
Function
Displays the order that the BIOS searches devices when
trying to find an operating system to boot. A new device
can be added here.
A displayed boot device can be removed from the boot
order.
Function
Displays the system date.
Displays the system time.
Function
Enables or Disables boot from a USB mass storage device.
Default : Enabled
Allows you to enable or disable various on-board devices.
• Enable/Disable Front Camera Device
• Enable/Disable Rear Camera Device
• Enable/Disable Media Card Device
• Enable/Disable GPS
Function
Displays the panel brightness when the ambient light
sensor is off.
• Brightness on Battery
• Brightness on AC
23