Removing The Palm Rest Bracket - Dell Inspiron Mini 10v N Service Manual

Back to Contents Page
Palm Rest Bracket
Dell™ Inspiron™ 1011 Service Manual
Removing the Palm Rest Bracket
Replacing the Palm Rest Bracket
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Palm Rest Bracket
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the hard drive (see
6. Remove the five screws that secure the palm rest bracket to the computer base.
7. Turn the computer over and open the display.
8. Remove the four screws that secure the palm rest bracket.
Begin.
Battery).
Removing the Keyboard).
Removing the Palm Rest).
Removing the Hard Drive).
Removing the Battery) before working inside the