Display Bezel; Replacing The Display Assembly; Removing The Display Bezel - Dell Inspiron Mini 10v N Service Manual

Replacing the Display Assembly

1. Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
2. Route the Mini-Card cables and connect them to the Mini-Cards, if applicable (see
3. Replace the system board (see
4. Replace the AC adapter connector (see
5. Replace the USB and SIM card board (see
6. Replace the palm rest bracket (see
7. Replace the hard drive (see
8. Replace the palm rest (see
9. Replace the keyboard (see
10. Replace the battery (see Replacing the
Display Bezel

Removing the Display Bezel

CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1. Remove the display assembly (see
2. Press and remove the hinge cover caps (one on each side).
1 hinge cover caps (2)
3. Remove the two rubber pads (one on either side) on the display bezel screws.
4. Remove the two screws on the display bezel.
5. Using your fingertips, carefully pry up the inside edge of the display bezel.
Replacing the System Board).
Replacing the AC Adapter
Replacing the USB and SIM Card
Replacing the Palm Rest Bracket).
Replacing the Hard Drive).
Replacing the Palm Rest).
Replacing the Keyboard).
Battery).
Removing the Display Assembly).
Replacing the Mini-Card).
Connector).
Board).