Lan Function - Fujitsu DESKPOWER 5000 User Manual

LAN function

LAN Controller
Transmission buffer RAM
External Interface
Transmission media
Transmission system
Access method
Data transfer rate
Cabling form
Maximum segment length
Maximum nodes/segments
*1: To successfully activate the network at 100 Mbps, use a non shield twisted pair (UTP) cable of Category 5 or higher.The data
may be lost, if Category 3 cable is used.
*2: The hub unit implies a 100 BASE-TX/10BASE-T concentrator.
Point
The standard built-in LAN of this computer automatically supports the data rate of the network.
If the network speed changes due to changes in the hub unit, be sure to use cables of an appropriate
data grade for that speed.
56
Intel 82801DB(ICH4)integrated + 82562EM
3K bytes for transmission (send/receive)
ISO8802-3 100BASE-TX/10BASE-T
*1
Twisted pair cable
(100Mbps: Category 5, 10Mbps: Category 3 - 5)
Baseband
CSMA/CD
100 Mbps, 10 Mbps
Star form
100 m
Depending on the hub unit
*2