Fujitsu DESKPOWER 500 Series User Manual page 54

5 Insert the expansion card into the slot.
Insert the expansion card into the slot, and secure it with the screw removed in step 4.
6 Install the mounting bracket.
Install the reinforcement bracket to the three stoppers on the PC unit.
7 Reinstall the upper cover.
Point
• For removal, use the installation procedure in the reverse order.
8 Plug the PC.
9 Turn on the PC.
• Windows Me/98/95/2000 models
The system configures the device driver and resource to enable the expansion card.
Point
• The device drivers automatically selected by Plug & Play are those included in Windows Me/
98/95/2000. The device drivers for some expansion cards or peripheral devices may not be
included in these operating systems. If so, use a CD-ROM containing the device driver sup-
plied with the expansion card and install it by following the messages.
• Before using the installed expansion card, use Device Manager to check whether the device
driver is installed. If not, delete the device driver and then reboot Windows Me/98/95/2000.
• Windows NT models
Configure the device driver for the expansion card.
Refer to the manual for the expansion card. Once the device driver is configured, the expansion
card is enabled.
Stopper
43