Using Composite Video (Good) - Insignia NS-24E400NA14 User Manual

Insignia 24" LED TV

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
Composite Analog audio
video cable cable
connector connectors
Composite Analog
video jack audio jacks
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back
of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
Note
• The COMPONENT/AV Y/VIDEO, P
• When you connect the audio using the L and R audio jacks, the audio
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Component/AV, then press ENTER.
COMPONENT/AV Y/VIDEO jack.
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
output is analog.
www.insigniaproducts.com
Back of TV
(composite video cable)
, and P video jacks (used to connect
B R
DVD or Blu-ray player
AV cable
21