Installing A Wall-Mount Bracket - Insignia NS-24E400NA14 User Manual

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See "Miscellaneous" on page 72.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the TV stand is installed, remove the two screws that secure the stand column to the TV, then remove the
stand column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Notes
• The length of the wall-mount screws vary depending on the wall-mount
• The mounting holes on the back of your TV take type M4 screws.
Wall-mount brackets
6
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
www.insigniaproducts.com
NS-24E400NA14 Insignia 24" LED TV
2.95 in. (75 mm)