Using Component Video (Better) - Insignia NS-24E400NA14 User Manual

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Analog
video cable audio cable
connectors connectors
Component Analog
video jacks audio jacks
To connect a cable or satellite box using component video:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the COMPONENT/AV IN Y/VIDEO, P
on the back of your TV and the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
• The COMPONENT/AV Y/VIDEO, P
• When you connect the audio using the L and R audio jacks, the audio
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select Component/AV, then press ENTER.
14
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
output is analog.
www.insigniaproducts.com
NS-24E400NA14 Insignia 24" LED TV
Back of TV
Audio cable
Component video cable
, and P video jacks (used to connect
B R
Cable or
satellite box
, and P video jacks
B R