Enabling The Iamt Solution; Using The Mebx Setup Utility Menus - HP EliteBook 8460p Reference Manual

Enabling the iAMT solution

To configure iAMT settings:
NOTE: The ctrl+p
Setup.
1. Turn on or restart the computer.
2. Before Windows starts up, press ctrl+p.
NOTE: If you do not press
access the MEBx setup utility.
3. Enter the ME password. The factory setting for the password is admin.
The MEBx setup utility opens. Use the arrow keys to navigate.
4. Choose to configure Intel ME, configure iAMT, or change the Intel ME password.
5. When you have made your selections, select Exit to close the MEBx setup utility.

Using the MEBx setup utility menus

NOTE: For more information on iAMT, go to the Intel Web site at http://www.intel.com, and then
search for iAMT.
Intel ME Configuration
Select
Intel ME State Control
Intel ME Firmware Local Update
LAN Controller
Intel ME Features Control
Intel ME Power Control
iAMT Configuration
Select
Host Name
TCP/IP
Provision Model
Setup and Configuration
Un-Provision
SOL/IDE-R
prompt is visible only if the AMT Setup Prompt option is enabled in Computer
ctrl+p at the appropriate time, you must repeat steps 1 and 2 to
Using Intel Active Management Technology (select models only)
To do this
Disable/enable the management engine.
Disable/enable local management of firmware updates.
Disable/enable the integrated network controller.
Disable/enable AMT or none.
Configure the management engine power policies.
To do this
Assign a host name to the computer.
Disable/enable network interface or DHCP (assigns an IP
address if DHCP has been disabled) or change the domain
name.
Assign enterprise or small business iAMT model.
Set options to control remote configuration of AMT.
Reset the AMT configuration to factory defaults.
Disable/enable remote boot control to IDE diskette or CD ­
ROM and assign a user name and password.
87