Onboard Parallel Port - Gigabyte GA-M68MT-S2P User Manual

NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is
configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 1 Secondary RAID
Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller. This item
is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Primary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller. This item
is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Secondary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller. This item
is configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
On-Chip MAC Lan
Enables or disables the onboard LAN function. (Default: Auto)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
Onboard Serial Port 1
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 2F8/IRQ3, 3F8/IRQ4(default), 3E8/IRQ4, 2E8/IRQ3, Disabled.

Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and correspond-
ing interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.
ECP Mode Use DMA
Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode
is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.
On-Chip USB
V1.1+V2.0
V1.1
Disabled
Enables the USB 1.1 and USB 2.0 controllers. (Default)
Enables only the USB 1.1 controller.
Disables the onboard USB controller.
- 41 - BIOS Setup