Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-M52LT-D3 User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

CPU Frequency (MHz)
PCIE Clock (MHz)
CPU Clock Ratio
CPU North Bridge Freq.
Set Memory Clock
x Memory Clock
 DRAM Configuration
DDR3 Voltage Control
CPU NB VID Control
CPU Voltage Control
Normal CPU Vcore
higf : Move Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock settings you made is dependent on your over-
all system configurations. Incorrectly doing overclock may result in damage to CPU, chipset, or
memory and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other unexpected
results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear
the CMOS values and reset the board to default values.)
CPU Frequency(MHz)
Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz.
Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifi-
cations.
PCIE Clock(MHz)
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 145 MHz.
(Default: 100)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being used.
CPU NorthBridge Freq.
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used.
Set Memory Clock
Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory
clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto)
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
MB Intelligent Tweaker(M.I.T.)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[200]
[100]
[Auto]
[Auto]
[Auto]
x6.66 1333Mhz
[Press Enter]
[Normal]
[Normal]
[Normal]
1.3250V
F10: Save
- 33 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup