C1E Support - Gigabyte GA-970A-DS3P User Manual

& Core Performance Boost
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Auto)
& CPB Ratio
(Note 1)
Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed.
(Default: Auto)
& CPU Unlock
Allows you to determine whether unlock hidden CPU cores. (Default: Disabled)
& Cool&Quiet
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
Enabled
heat output from your computer and its power consumption. (Default)
Disables this function.
Disabled
& C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power
consumption will be reduced during system halt state.
If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the
Enabled
hardware C1E function. If not, the BIOS will enable the software C1E function. (Default)
Disables this function.
Disabled
& SVM
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Enabled)
& CPU core Control
(Note 1)
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
to enable all CPU cores (number of cores available depends on the CPU being used). (Default: Automatic
mode)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disables this function. (Default)
Disabled
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
The first memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
(Note 1)
(Note 2)
- 18 -